IKO metatech Balcony

Two-component PMMA waterproofing system that consists of:

1. IKO metatech Concrete Primer
2. IKO metatech
3. IKO polyester Fleece 110
4. IKO metatech
5. IKO metatech Floor

Application

• Balcony, terrace, gallery, stairs

Advantages

• Two-component: simple and rapid installation
• Ideal for projects that need to be released quickly
• Sustainable PMMA technology
• Installation possible under poor weather conditions
• Different decorative combinations possible

IKO metatech Concrete Primer
A two-component primer based on methacrylates for concrete and cement-bound surfaces.

IKO metatech
A two-component coating based on methacrylates that cures after the hardener powder has been incorporated. Apart from fast curing (after only 45 minutes), IKO metatech is also characterised by rapid installation, as the second layer is applied wet-on-wet to the first layer. After drying, IKO metatech forms the sealing membrane.

IKO polyester Fleece 110
A reinforcement fleece consisting of non-woven polyester with a density of 110 g/m². This fleece is rolled out in the first wet layer of IKO metatech and pressed, and provides the strength, stability and penetration resistance of the system.

IKO metatech Floor
A two-component cast floor based on methacrylates that hardens after mixing with the hardener powder. After drying, IKO metatech Floor forms the wear layer of the system.

IKO metatech Finish
A two-component finish based on methacrylates that hardens after mixing with the hardener powder. The colored IKO metatech Finish is sprinkled with paint flakes or quartz sand and can also be used as a sealer.