IKO metatech Car Park

Two-component PMMA waterproofing system that consists of:
- IKO metatech Concrete Primer
- IKO metatech
- IKO polyester Fleece 110
- IKO metatech Floor
- IKO dorsilit 1 mm
- IKO metatech Finish
Application
- Parking roof
- Intermediate deck
- Sloping ramp
Advantages
- Two-component: extremely fast installation and drying
- Ideal for projects that need to be delivered on a tight schedule.
- Sustainable PMMA technology
- Installation possible under poor weather conditions
IKO metatech Concrete Primer
A two-component primer based on methacrylates for concrete and cement-based substrates.
IKO metatech
A two-component coating based on methacrylates that cures after the hardener powder has been incorporated. Apart from fast curing (after only 45 minutes), IKO metatech is also characterised by rapid installation, as the second layer is applied wet-on-wet to the first layer. After drying, IKO metatech forms the sealing membrane.
IKO polyester Fleece 110
A reinforcement fleece consisting of non-woven polyester with a density of 110 g/m². This fleece is rolled out in the wet first layer of IKO metatech and pressed, and provides the strength, stability and penetration resistance of the system.
IKO metatech Floor
A two-component self-levelling floor based on methacrylates that cures after the hardener powder has been incorporated. After drying, IKO metatech Floor forms the protective layer of the system.
IKO metatech Finish
A two-component finish based on methacrylates that cures after the hardener powder has been incorporated. The coloured IKO metatech Finish is filled in with quartz sand and is also used as a sealer. After drying, IKO metatech Finish forms the top layer of the system.
CERTIFICATION
ETA-15/0478 certificate (European Technical Assesment) according to ETAG005 – view all certificates
